Introduction of Safety Shoe Impact Tester

What is impact testing?


Impact testing is used to analyze the resistance of a material. The test involves looking at the material when it experiences a shock that causes the sample to fracture, deform, or break.Impact testing machine is used to study the hardness of a materials; in other words, how it behaves when it experiences an impact and its ability to absorb energy during plastic deformation. 


About the Safety Shoe Impact Tester Principle


This Best Safety Shoes Impact Tester is equipped with a steel striker in the required mass. When release striker, it would drop down freely on the vertical guides from a certain height to give certain impact energy. With mechanism provision to catch the striker after the first strike to ensure the toe cap would be hit for only once. Alarm before the striker falls down.


The Safety Footwear Impact Tester ULB-F02 designed by Gester comply with EN, ANSI, BS, CSA regulations. Impacting the the steel toe caps of safety shoes through 100J or 200J power, then observe the sinkage to value its quality.


Why should we need to make the safty shoes impact test?


Impact and squeeze tests are run, following the regulations, which specify exactly how such tests must be carried out. The bottom line is that both tests are designed to check, after an impact or a compression of the tip, how much room is left inside the toe area, and whether the toecap has suffered damage due to the applied forces. 


Feature of Safety Shoe Impact Tester


1. Safety Shoes Test equip with protection fence, to avoid hazardous objects splash.


2. Control box separate with impactor, to protect personnel security.


3. Safety Footwear Impact Tester equip with electromagnet absorption device and automatically grab impact head to set height.


4. Safety Footwear Impact Resistance Test Equipment with two buffer cylinder, to avoid second impact.

Comments

Popular posts from this blog

How to Hang a Suspended Ceiling From Steel Beams

Importance of Calibration Service, Material Testing

Level Measurement Solutions