Details of medical nonwoven fabric

With the continuous update and rapid development of packaging materials for sterile items, medical non-woven fabrics as the final packaging material for sterile items have successively entered the disinfection supply centres of hospitals at all levels. How to control the quality of medical nonwoven fabric, we must pay attention to these ten aspects of medical non-woven fabric.


1.Medical nonwoven fabric are different from ordinary non-woven fabrics and composite non-woven fabrics. Ordinary non-woven fabrics do not have antibacterial properties; composite non-woven fabrics have a good waterproof effects and poor air permeability, and are generally used for surgical gowns and surgical sheets. Medical nonwovens use spunbond meltblown and spunbond (SMS) processes. It is made by pressing and is antibacterial, hydrophobic, breathable and dander-free. It is used for final packaging of sterile items. It is disposable and does not require cleaning.


2. Requirements for the quality standard of medical nonwoven fabric: The medical non-woven fabrics used for the final packaging material of sterile medical devices should meet the specifications of GB/T19633 and YY/T0698.2.


3. Validity period of non-woven fabric: The validity period ofmedical nonwoven fabric itself is generally 2 to 3 years, and the validity period of products of different manufacturers is slightly different, please refer to the instructions for use. Sterile items packed with medical non-woven fabrics should be valid for 180 days and not affected by the sterilization method.


4. medical nonwoven fabric are used for the packaging of surgical instruments, and the airtight packaging method should be adopted. Two layers of non-woven fabrics should be packed twice. Repeated folding creates a long tortuous path to prevent microorganisms from "easily" entering the sterilization package. Two layers of non-woven fabrics cannot be packaged at one time.


5. After the medical nonwoven fabric is sterilized by high temperature, the internal results will change, which will affect the permeability and antibacterial properties of the sterilization medium. Therefore, medical non-woven fabrics must not be repeatedly sterilized.


6. Due to the hydrophobicity of the non-woven fabric, the high temperature will sterilize the instruments with excess and heavy metals, and condensation water will be formed during the cooling process, which can easily produce wet packaging. Therefore, pad water-absorbing materials in large equipment packages, appropriately reduce the load capacity of the sterilizer, leave a gap between the sterilization packages, appropriately extend the drying time, and try to avoid wet packages.


7. Hydrogen peroxide low-temperature plasma should use special non-woven fabrics. Medical nonwovens containing vegetable fibres cannot be used because vegetable fibres absorb hydrogen peroxide.


8. Although medical non-woven fabrics are not medical devices, they are related to the sterilization quality of medical devices. The quality and packaging method of medical nonwovens as packaging materials are critical to ensure the level of sterility.


9. Please refer to the inspection report and product batch inspection report provided by the manufacturer, and check the physical and chemical properties of medical non-woven fabrics to ensure the quality of the products used.


Synwin is a professional non woven fabric manufacturer of environmentally friendly non-woven fabrics (medical nonwoven fabric) and has a complete and scientific quality management system. The main products are flame retardant non-woven fabrics, embossed non-woven fabrics, spun lace non-woven fabrics, home textile non-woven fabrics, printed non-woven fabrics, rust-proof non-woven fabrics, composite non-woven fabrics, PP non-woven fabrics, thermal Rolled non-woven fabrics, polypropylene non-woven fabrics, medical non-woven fabrics, etc. Welcome to the factory to buy!

Comments

Post a Comment

Popular posts from this blog

How to Hang a Suspended Ceiling From Steel Beams

The suspended ceiling hangs under the roof or floor structure above, hiding ugly mechanical and electrical equipment from the view, while also allowing you to easily reach these equipment as needed.While wooden frames usually support such ceilings, in rooms where metal frames are used instead of traditional wood, you can also hang ceilings from steel beams.Hanging the ceiling from the beam requires you to use a special clip to connect the support line to the beam without compromising its structural integrity.Measure 4 inch down from the bottom of the lowest beam, pipe or pipe in the ceiling space.If you plan to use panel fluorescent lamps in your ceiling, add an additional 2 inch to this measurement.Make a mark on the wall indicating the location of the facade.Set up a laser level to extend the mark you made on the wall to the entire wall length.Draw a chalk line on the wall to mark the position.Mark all four walls repeatedly with chalk lines indicating the height of the ceiling.Instal
Read more

Importance of Calibration Service, Material Testing

When it comes to Calibration services, genuine service providers offer full recall system and data sheets for all items calibrated. Service needs to be instrument specific. With the advent of technology, Calibration service has seen a tremendous change and has gone through various phases to get the top quality. Calibration is a great deal for industrial purpose. It makes sure that products are manufactured as per specification. It also checks the competence level of technically valid results. The calibrated measuring instrument helps in checking the quality and valuation of the product. In cases of electronic equipment, it is essential to calibrate instruments to keep a check on quality and performance. Calibration facilitates in improving measurement abilities. Calibration service can be manual or automated.  textile testing equipment manufacturers Material Testing machines are available for a wide variety of industries including materials testers for plastics, textiles, adhesives, fi
Read more

Level Measurement Solutions

Makeup water treatment is an important component of steam generation. It is the means to resupply the system with water suitable for boiler and other operations that, was lost in the cycle.The steam generation cycle, level control for the water treatment process is not necessarily about efficiency, but rather, accuracy, reliability and safety, while providing proper inventory management to ensure chemical and makeup water supply meets demand. The focus is on the chemical component of the makeup water treatment since it presents difficulties for level technologies that may work perfectly on non-chemical applications related to the water treatment process or those with limited variations in the contents of the vessel's vapor space. Although important measurements such as ammonia, acid, caustic and other chemical storage tanks are not difficult level applications by any stretch, small nuances in how the vessels are monitored relative to level technology can have a dramatic effect on t
Read more