What do I do if my filter element gets sucked out of place during work?

Sometimes, the wrong use of the filter elements or the mismatched element can cause unnecessary problems and accidents. Flattening is a common problem.

How can we avoid these problems? We must first understand why the filter element has become flattened.


1. The filter element has become blocked and cannot be replaced.


The filter element became blocked by pollutants from work, so it was not cleaned up in time. This resulted in an increase of pressure and insufficient strength, which led to the filter element being flattened.


2. Filter element selection is not appropriate.


The filter element must be selected for its suitability in the current environment. Filter element flattening can also occur if the pressure or accuracy of the filter elements is not sufficient.


Customers believe that stainless steel sintered mesh and sintered felt filters will prevent this from happening. However, this is not true. These two types of stainless-steel filter elements are not only resistant to pressure, but they also have higher pressure resistance than their own. Flattening will occur.


To achieve a better result, we must adjust to work pressures, such as adding a skull.


3. Incorrect installation: The filter element must be installed accurately and correctly.


Guangzhou Lvyuan Water Purification Equipment Co., Ltd. specializes in the production of various filter elements, welcome to choose!

Comments

Post a Comment

Popular posts from this blog

How to Hang a Suspended Ceiling From Steel Beams

The suspended ceiling hangs under the roof or floor structure above, hiding ugly mechanical and electrical equipment from the view, while also allowing you to easily reach these equipment as needed.While wooden frames usually support such ceilings, in rooms where metal frames are used instead of traditional wood, you can also hang ceilings from steel beams.Hanging the ceiling from the beam requires you to use a special clip to connect the support line to the beam without compromising its structural integrity.Measure 4 inch down from the bottom of the lowest beam, pipe or pipe in the ceiling space.If you plan to use panel fluorescent lamps in your ceiling, add an additional 2 inch to this measurement.Make a mark on the wall indicating the location of the facade.Set up a laser level to extend the mark you made on the wall to the entire wall length.Draw a chalk line on the wall to mark the position.Mark all four walls repeatedly with chalk lines indicating the height of the ceiling.Instal
Read more

Importance of Calibration Service, Material Testing

When it comes to Calibration services, genuine service providers offer full recall system and data sheets for all items calibrated. Service needs to be instrument specific. With the advent of technology, Calibration service has seen a tremendous change and has gone through various phases to get the top quality. Calibration is a great deal for industrial purpose. It makes sure that products are manufactured as per specification. It also checks the competence level of technically valid results. The calibrated measuring instrument helps in checking the quality and valuation of the product. In cases of electronic equipment, it is essential to calibrate instruments to keep a check on quality and performance. Calibration facilitates in improving measurement abilities. Calibration service can be manual or automated.  textile testing equipment manufacturers Material Testing machines are available for a wide variety of industries including materials testers for plastics, textiles, adhesives, fi
Read more

Level Measurement Solutions

Makeup water treatment is an important component of steam generation. It is the means to resupply the system with water suitable for boiler and other operations that, was lost in the cycle.The steam generation cycle, level control for the water treatment process is not necessarily about efficiency, but rather, accuracy, reliability and safety, while providing proper inventory management to ensure chemical and makeup water supply meets demand. The focus is on the chemical component of the makeup water treatment since it presents difficulties for level technologies that may work perfectly on non-chemical applications related to the water treatment process or those with limited variations in the contents of the vessel's vapor space. Although important measurements such as ammonia, acid, caustic and other chemical storage tanks are not difficult level applications by any stretch, small nuances in how the vessels are monitored relative to level technology can have a dramatic effect on t
Read more