Buying guide of car subwoofer
Subwoofers in the trunk
Subwoofers are speakers dedicated solely to reproducing low frequencies. No matter what kind of music you like, or how softly or loudly you like to listen, a quality sub can really improve your overall listening experience. Car speakers are small, so they have trouble producing enough low-frequency sound to give your music realism and depth. A subwoofer can make the difference between a good-sounding and a great-sounding system.
There are a lot of different ways to add a subwoofer to your vehicle. Which one is right for you depends on a lot of different factors, including your musical tastes, budget, and how much space you have available in your vehicle.
You should start by looking at component subs. A component sub is just the speaker itself — it'll need to be mounted in a subwoofer box to operate properly. In addition, you'll need to power the sub with an external amplifier. Component subs usually range in size from 8" to 15". There are models designed to operate on low or high power, and in a variety of different types of boxes. They are several different impedance and voice coil setups, so you can pick and choose among models to match up to your system design. If you're starting from the ground up in designing your custom system, choosing the subwoofer is a great place to start.
I want a sub that will blend in with my car's interior.
You're a prime candidate for a vehicle-specific sub, either powered or unpowered. These subs are designed to fit in out-of-the-way locations in many cars, trucks, and SUVs, and are often color-matched to the vehicle's interior. Like the powered subs we just talked about, they may not be the best choice if you're looking for really big bass, but they'll more than suffice for most listening needs without taking up a lot of interior space.
I want a simple, space-saving bass system.
A powered sub is a great way to go. A powered sub combines an amplifier and woofer in an enclosure. Since the amplifier is built-in, there's only one piece of equipment to find a place for and install. Many powered subs are compact and won't take up a lot of room in your vehicle. While powered subs can be very effective bass producers, their smaller drivers and amplifiers may not provide all the sound power you want if you're looking for really big bass. On the other hand, their relatively simple installation and small size make them a great add-on to factory stereo systems.
Some key specs to consider
Once you know what type of subwoofer or system you'd like to buy, comparing specs can be helpful in making your decision. Here are some key specs to consider:
Number of voice coils — Dual voice coil subwoofers are a popular choice among car audio enthusiasts who want more flexibility in wiring their sound systems. While typical subwoofers have a single voice coil, dual voice coil (DVC) subwoofers use two separate voice coils, each with its own connections, mounted on one cylinder, connected to a common cone.
Size of the woofer — It's a never-ending question — what size subwoofers play loudest and lowest? It's not an easy question — you need to consider sensitivity, enclosure type, and available power. If your ultimate goal is to have a system that plays loud and low, and space isn't an issue, go for the biggest subs. But don't underestimate smaller subs. Properly powered and in the right enclosure, smaller subs can put out plenty of sound.
Power — If you want a system that really booms, there's no substitute for plenty of power. Pay attention to RMS power ratings, not peak power ratings. RMS ratings measure continuous power handling or output and are a much more realistic measure than peak power. Make sure the sub can at least handle your amp's output power.
Impedance — Most subwoofers are rated at 4 ohms impedance, but 2-ohm, 8-ohm, and dual voice coil subwoofers have become commonplace. When you've chosen a subwoofer, look for amplifiers that will match up to your sub in terms of power rating and impedance.
Sensitivity — Sensitivity goes hand-in-hand with power to achieve high output. A sub that has a higher sensitivity rating requires less power to produce the same amount of sound as a model with a lower sensitivity rating.
Frequency range — Frequency range gives you an idea of how low a sub can play. Keep in mind, though, that the actual performance of the sub can depend on a lot of variables, like the box type it's mounted in.
Enclosure type — The type of enclosure a sub is mounted in will have a big effect on the type of sound it produces. In general, sealed boxes give you the deepest, most accurate sound, while ported and bandpass enclosures produce more volume.
Comments
Post a Comment