Standards for Face Masks

Before the production of the masks, we must first understand the corresponding national standards for masks. Qualified masks must meet the standard requirements, and different standards have different requirements for face mask making machine performance. 


Sincerely remind, before the production of masks, companies must understand mask standards for export mask use, export place/country, to avoid the creation of Unnecessary Losses. Don't take any chances by producing to strict standards. 


 Chinese standards for masks 

According to China's standards for masks, masks can be divided into three categories: labor masks, medical masks, and protective masks.


1 Standards for labor masks

The standard for labor protection masks in China is GB 2626-2006. Mainly for industrial dust masks, suitable for self-absorption filtered respiratory protection supplies for protection against particles of all kinds. It specifies the technical requirements, testing methods, and labeling of self-priming, filtered, anti-particulate respirators for respiratory protection articles.


According to the filtering efficiency of the mask, the mask is divided into three grades: 90 (KN90, KP90), 95 (KN95, KP95). 100 (KN100, KP100). The numbers indicate the size of the filtration efficiency, and the KN series is detected by sodium chloride particles, while the KP series is detected by oil particles. 


2 Standards for medical masks

There are three existing standards for medical masks in China: YY/T 0969-2013 "Disposable medical masks", YY 0469-2011 "Medical surgical mask", GB 19083-2010 "Medical protective mask technology Requirements".


YY/T 0969-2013, disposable medical masks, is for the use of ordinary medical and nursing staff for routine masks. The standard is a recommended standard for the pharmaceutical industry, implemented on October 1, 2014, the core performance requirements for the bacterial filtration efficiency (BFE) requirement of ≥95% and an indicator for microorganisms in the mask is specified.


YY 0469-2011, medical surgical masks, the standard specifies the technical requirements, test methods, marking and instructions for use and packaging, transport, and storage. The standard specifies the BFE requirements of the mask and YY/T 0969, increased PFE (≥30%), and synthetic blood penetration performance requirements for better protection in the case of surgical blood contact with the mask.


GB 19083-2010, Medical protective masks, implemented on August 1, 2011. The standard specifies the technical requirements, test methods, marking and instructions for use and packaging, transport and storage for medical protective masks, which suitable for use in medical work environments to filter particles from the air and block droplets, blood, body fluids, and secretions.


Note: The test flow rate for this standard is (85±2)L/min and the inspiratory resistance of the mask does not exceed 343.2Pa (35mmH20). Synthetic blood penetration requirements: spray 2mL of synthetic blood into the mask at 10.7KPa (80mmHg), there should be no penetration on the inside of the mask.


3 Standards for protective masks

GB/T 32610-2016, the first standard for civilian protective machine of China, was implemented on Nov 1, 2016. The standard covers mask raw material requirements, structural requirements, labeling and marking requirements, appearance requirements, etc., and the main indicators include functional indicators Particle filtration efficiency, exhalation and inhalation resistance index, airtightness index, and so on.


GB 32610 standard requires masks should be able to safely and securely protect the nose and mouth, there should be no accessible sharp corners and sharp edges, formaldehyde, dyes, microorganisms, and other factors that may cause harm to the human body to make detailed provisions to ensure the safety of the public when wearing protective masks.

Comments

Post a Comment

Popular posts from this blog

How to Hang a Suspended Ceiling From Steel Beams

The suspended ceiling hangs under the roof or floor structure above, hiding ugly mechanical and electrical equipment from the view, while also allowing you to easily reach these equipment as needed.While wooden frames usually support such ceilings, in rooms where metal frames are used instead of traditional wood, you can also hang ceilings from steel beams.Hanging the ceiling from the beam requires you to use a special clip to connect the support line to the beam without compromising its structural integrity.Measure 4 inch down from the bottom of the lowest beam, pipe or pipe in the ceiling space.If you plan to use panel fluorescent lamps in your ceiling, add an additional 2 inch to this measurement.Make a mark on the wall indicating the location of the facade.Set up a laser level to extend the mark you made on the wall to the entire wall length.Draw a chalk line on the wall to mark the position.Mark all four walls repeatedly with chalk lines indicating the height of the ceiling.Instal
Read more

Importance of Calibration Service, Material Testing

When it comes to Calibration services, genuine service providers offer full recall system and data sheets for all items calibrated. Service needs to be instrument specific. With the advent of technology, Calibration service has seen a tremendous change and has gone through various phases to get the top quality. Calibration is a great deal for industrial purpose. It makes sure that products are manufactured as per specification. It also checks the competence level of technically valid results. The calibrated measuring instrument helps in checking the quality and valuation of the product. In cases of electronic equipment, it is essential to calibrate instruments to keep a check on quality and performance. Calibration facilitates in improving measurement abilities. Calibration service can be manual or automated.  textile testing equipment manufacturers Material Testing machines are available for a wide variety of industries including materials testers for plastics, textiles, adhesives, fi
Read more

Level Measurement Solutions

Makeup water treatment is an important component of steam generation. It is the means to resupply the system with water suitable for boiler and other operations that, was lost in the cycle.The steam generation cycle, level control for the water treatment process is not necessarily about efficiency, but rather, accuracy, reliability and safety, while providing proper inventory management to ensure chemical and makeup water supply meets demand. The focus is on the chemical component of the makeup water treatment since it presents difficulties for level technologies that may work perfectly on non-chemical applications related to the water treatment process or those with limited variations in the contents of the vessel's vapor space. Although important measurements such as ammonia, acid, caustic and other chemical storage tanks are not difficult level applications by any stretch, small nuances in how the vessels are monitored relative to level technology can have a dramatic effect on t
Read more