Structural characteristics of air container

The air container is a container designed according to the shape of the cargo hold of the aircraft to ensure the maximum loading rate of the limited space in the cargo hold. There are huge differences in the structure and materials of air containers and international standard containers. Generally speaking, the characteristics of air container structures include:


① It is necessary to reduce the mass of the air freight container as much as possible, so the material constituting the box body is mainly aluminum alloy, and meets the requirements of GB / T15140;


② On the premise of meeting the requirements of strength and rigidity, it should reduce its own mass as much as possible;


③ The box itself and its internal structure should consider the movement limiting device, including the movement of the goods in the box and the movement of the box in the engine room;


④ When there is a rapid pressure loss in the cabin, the internal pressure of the box must be able to adapt to the pressure in the cabin, and the box must have a ventilation area of at least 5 square centimeters per cubic meter;


⑤ The inner and outer surfaces of the cabinet should avoid sharp corners and edges, as well as overly rough surfaces;


⑥ For a box with a fork groove, the fork inlet and the support seat should be able to transmit the load to the lower base, but the pressure on the lower base cannot exceed 9.55 kPa;


⑦ At the appropriate position on the outside of the box, there should be a handle for manually moving the box. Each handle should be able to withstand a pull force of 4449 cattle in any direction. At present, the commonly used aviation containers are AKE container, AMF container, AAU container and AMA container.

Comments

Post a Comment

Popular posts from this blog

How to Hang a Suspended Ceiling From Steel Beams

The suspended ceiling hangs under the roof or floor structure above, hiding ugly mechanical and electrical equipment from the view, while also allowing you to easily reach these equipment as needed.While wooden frames usually support such ceilings, in rooms where metal frames are used instead of traditional wood, you can also hang ceilings from steel beams.Hanging the ceiling from the beam requires you to use a special clip to connect the support line to the beam without compromising its structural integrity.Measure 4 inch down from the bottom of the lowest beam, pipe or pipe in the ceiling space.If you plan to use panel fluorescent lamps in your ceiling, add an additional 2 inch to this measurement.Make a mark on the wall indicating the location of the facade.Set up a laser level to extend the mark you made on the wall to the entire wall length.Draw a chalk line on the wall to mark the position.Mark all four walls repeatedly with chalk lines indicating the height of the ceiling.Instal
Read more

Importance of Calibration Service, Material Testing

When it comes to Calibration services, genuine service providers offer full recall system and data sheets for all items calibrated. Service needs to be instrument specific. With the advent of technology, Calibration service has seen a tremendous change and has gone through various phases to get the top quality. Calibration is a great deal for industrial purpose. It makes sure that products are manufactured as per specification. It also checks the competence level of technically valid results. The calibrated measuring instrument helps in checking the quality and valuation of the product. In cases of electronic equipment, it is essential to calibrate instruments to keep a check on quality and performance. Calibration facilitates in improving measurement abilities. Calibration service can be manual or automated.  textile testing equipment manufacturers Material Testing machines are available for a wide variety of industries including materials testers for plastics, textiles, adhesives, fi
Read more

Level Measurement Solutions

Makeup water treatment is an important component of steam generation. It is the means to resupply the system with water suitable for boiler and other operations that, was lost in the cycle.The steam generation cycle, level control for the water treatment process is not necessarily about efficiency, but rather, accuracy, reliability and safety, while providing proper inventory management to ensure chemical and makeup water supply meets demand. The focus is on the chemical component of the makeup water treatment since it presents difficulties for level technologies that may work perfectly on non-chemical applications related to the water treatment process or those with limited variations in the contents of the vessel's vapor space. Although important measurements such as ammonia, acid, caustic and other chemical storage tanks are not difficult level applications by any stretch, small nuances in how the vessels are monitored relative to level technology can have a dramatic effect on t
Read more