Here is why "water circulation air conditioner" becomes more and more popular.

Air conditioner has become a necessity for every family when a hot summer.

 news-Here is why water circulation <a href=air conditioner becomes more and more popular-NULITE-img">

Because of "fluorine air conditioner" that destroys the earth's ozone layer, more consumers will choose the "water air conditioner" to heating and cooling house.

What exactly is "water air conditioner"? which is widely popular by users, and has also been recommended by many experts? Let me have a description.

 

Composed of two combined system of air source heat pump.

 

As a star product of "water air conditioner", the dual system of air source heat pump is popular in the market. It is composed of an outdoor host (air source heat pump), terminal equipment (indoor heat exchange, refrigeration system), transmission and distribution system, and control system. It meets the needs of heating and cooling.

 

The construction of the dual system 

 

01 heat pump host

Before selecting the heat pump host, it is best to know the local minimum temperature, water supply temperature and precipitation, door and window standards, etc. in advance to ensure the thermal insulation of the door and window. 

 

02 Transmission and Distribution System

The transmission and distribution system includes energy storage buffer water tank, expansion water tank, water pump, pipeline valve, sub-catchment and water balances. The buffer water tank can increase the water capacity of the small system, store cold and heat, and the temperature of the system changes more smoothly, avoiding the frequent start and stop of the unit when the host is running at low load, and can effectively extend the service life of the host.

 

03 End System

End systems include fan coils, low temperature radiators, floor heating, and capillary nets.

 

04Control system

The control system includes power supply, control line and control switch, etc., and the control panel is wired control, wireless, and Internet of things intelligent control.

Personalized comfort experience has gradually become the pursuit of many families. The air supply heat pump dual supply provides accurate temperature control, small indoor temperature fluctuations, quieter operation, high energy efficiency, and obvious energy-saving economic advantages.

 

news-NULITE-img

Advantages.

01 multiple functions

An air source heat pump system has multiple functions, there is no need of multiple installation of systems.

The air source heat pump two systems has one source and two ends, and one heat source, which uses the heat pump unit to supply cold water in summer and hot water in winter. The two ends refer to the end system where the radiant heating end and the fan coil co-exist.

 

02 Better for energy efficiency

The air source heat pump combined system has good energy-saving performance, and its operating cost is lower than the combination of multi-lined and wall-hung furnace in the fluorine system. The operating principle of the system is to drive the compressor with very little electric power in winter, absorb a large amount of low-temperature heat energy in the air and convert it into high-temperature heat energy, generate hot water not exceeding 55 ℃, and circulate as a heat medium in the dedicated floor heating pipeline. heat.

03 more comfortable

After the outdoor unit compresses the refrigerant, the cold and hot water generated by heat exchange with water is then exchanged with indoor air. The temperature difference during the heat exchange is only about 5 ° C, the wind is soft, the comfort is very high, and the moisture in the air is not easy to lose , The human body feels more natural and comfortable.

04 Beautiful installation without occupying land

Two air source heat pumps are provided for concealed installation.

In terms of heating, air source heat pumps are used to heat water, and then heat energy is transferred through floor heating pipes. The heat pump host heats the water and then introduces it into the floor heating pipe to transfer it to each room.

In terms of refrigeration, the two power supplies are connected to the central air coil and erected on the ceiling. The air coil is connected to the air source heat pump host.

Comments

Post a Comment

Popular posts from this blog

How to Hang a Suspended Ceiling From Steel Beams

The suspended ceiling hangs under the roof or floor structure above, hiding ugly mechanical and electrical equipment from the view, while also allowing you to easily reach these equipment as needed.While wooden frames usually support such ceilings, in rooms where metal frames are used instead of traditional wood, you can also hang ceilings from steel beams.Hanging the ceiling from the beam requires you to use a special clip to connect the support line to the beam without compromising its structural integrity.Measure 4 inch down from the bottom of the lowest beam, pipe or pipe in the ceiling space.If you plan to use panel fluorescent lamps in your ceiling, add an additional 2 inch to this measurement.Make a mark on the wall indicating the location of the facade.Set up a laser level to extend the mark you made on the wall to the entire wall length.Draw a chalk line on the wall to mark the position.Mark all four walls repeatedly with chalk lines indicating the height of the ceiling.Instal
Read more

Importance of Calibration Service, Material Testing

When it comes to Calibration services, genuine service providers offer full recall system and data sheets for all items calibrated. Service needs to be instrument specific. With the advent of technology, Calibration service has seen a tremendous change and has gone through various phases to get the top quality. Calibration is a great deal for industrial purpose. It makes sure that products are manufactured as per specification. It also checks the competence level of technically valid results. The calibrated measuring instrument helps in checking the quality and valuation of the product. In cases of electronic equipment, it is essential to calibrate instruments to keep a check on quality and performance. Calibration facilitates in improving measurement abilities. Calibration service can be manual or automated.  textile testing equipment manufacturers Material Testing machines are available for a wide variety of industries including materials testers for plastics, textiles, adhesives, fi
Read more

Level Measurement Solutions

Makeup water treatment is an important component of steam generation. It is the means to resupply the system with water suitable for boiler and other operations that, was lost in the cycle.The steam generation cycle, level control for the water treatment process is not necessarily about efficiency, but rather, accuracy, reliability and safety, while providing proper inventory management to ensure chemical and makeup water supply meets demand. The focus is on the chemical component of the makeup water treatment since it presents difficulties for level technologies that may work perfectly on non-chemical applications related to the water treatment process or those with limited variations in the contents of the vessel's vapor space. Although important measurements such as ammonia, acid, caustic and other chemical storage tanks are not difficult level applications by any stretch, small nuances in how the vessels are monitored relative to level technology can have a dramatic effect on t
Read more