How to maintain non-woven fabric?

Non-woven fabric is a kind of fabric formed without the need of spinning and weaving. So in the process of maintaining the non-woven fabric, what matters need to pay attention to?


Non-woven fabric maintenance:


1, to keep clean, often wash, to prevent moth breeding.


2. During seasonal storage, it shall be washed, ironed, dried and sealed with plastic bags, laid flat in the wardrobe. Pay attention to shading to prevent fading. Should be often ventilated, dedusting wet, can not be exposed to the sun. Should put inside chest mildew-proof, moth-proof tablet, lest cashmere product is affected by damp mildew-proof insect.


3. The lining of the matching coat should be smooth when worn inside, and hard objects such as pens, key bags and mobile phones should be avoided in the pockets to avoid local friction. Wear when outside the friction that reduces as far as possible with hard object (if sofa backrest, armrest, desk top) and crochet hang. Wearing time is not easy to be too long, 5 days or so must stop wearing or change to wear, so as to restore the elasticity of clothing, so as to avoid fiber fatigue damage.


4, if there is a ball, do not pull, must use scissors to cut off the ball, so as not to be out of line and cause irreparable.


Advantages of non-woven fabrics:


Ventilation, filter, heat preservation, water absorption, water resistance, elasticity, non-unshaggy feel, soft, light and elastic, returnable directionality without fabric, high productivity compared with textile fabric, fast production speed, low price, mass production and so on.


Disadvantages of non-woven fabrics:


(1) poor strength and durability compared with textile fabrics


(2) it cannot be cleaned like other fabrics


(3) the fibers are arranged in a certain direction so that they tend to split at right angles.

Comments

Post a Comment

Popular posts from this blog

How to Hang a Suspended Ceiling From Steel Beams

The suspended ceiling hangs under the roof or floor structure above, hiding ugly mechanical and electrical equipment from the view, while also allowing you to easily reach these equipment as needed.While wooden frames usually support such ceilings, in rooms where metal frames are used instead of traditional wood, you can also hang ceilings from steel beams.Hanging the ceiling from the beam requires you to use a special clip to connect the support line to the beam without compromising its structural integrity.Measure 4 inch down from the bottom of the lowest beam, pipe or pipe in the ceiling space.If you plan to use panel fluorescent lamps in your ceiling, add an additional 2 inch to this measurement.Make a mark on the wall indicating the location of the facade.Set up a laser level to extend the mark you made on the wall to the entire wall length.Draw a chalk line on the wall to mark the position.Mark all four walls repeatedly with chalk lines indicating the height of the ceiling.Instal
Read more

Importance of Calibration Service, Material Testing

When it comes to Calibration services, genuine service providers offer full recall system and data sheets for all items calibrated. Service needs to be instrument specific. With the advent of technology, Calibration service has seen a tremendous change and has gone through various phases to get the top quality. Calibration is a great deal for industrial purpose. It makes sure that products are manufactured as per specification. It also checks the competence level of technically valid results. The calibrated measuring instrument helps in checking the quality and valuation of the product. In cases of electronic equipment, it is essential to calibrate instruments to keep a check on quality and performance. Calibration facilitates in improving measurement abilities. Calibration service can be manual or automated.  textile testing equipment manufacturers Material Testing machines are available for a wide variety of industries including materials testers for plastics, textiles, adhesives, fi
Read more

Level Measurement Solutions

Makeup water treatment is an important component of steam generation. It is the means to resupply the system with water suitable for boiler and other operations that, was lost in the cycle.The steam generation cycle, level control for the water treatment process is not necessarily about efficiency, but rather, accuracy, reliability and safety, while providing proper inventory management to ensure chemical and makeup water supply meets demand. The focus is on the chemical component of the makeup water treatment since it presents difficulties for level technologies that may work perfectly on non-chemical applications related to the water treatment process or those with limited variations in the contents of the vessel's vapor space. Although important measurements such as ammonia, acid, caustic and other chemical storage tanks are not difficult level applications by any stretch, small nuances in how the vessels are monitored relative to level technology can have a dramatic effect on t
Read more