What is Martindale Abrasion Tester?
Introduction of Martindale Abrasion Tester Martindale Abrasion Tester is used to test the abrasion resistance ability of insole, leather, textile and etc to defined cycles by rubbing. Martindale Abrasion Test Procedure: -Principle: Using a Martindale Abrasion Tester, standard wool or sandpaper is used to apply a specified pressure to the sample, and the sample is rubbed in various directions by a Lissajous curve to test the wear resistance of the material. -Sampling and environment: For each dry friction test and wet friction test, no less than 2 test samples per group, use a circular sampler (38 mm diameter) to take no less than two test samples from different locations of the material to be tested. In the case of woven fabrics, the warp or weft of any two specimens should be different. When sampling from patterned materials, each pattern should be tested. When evaluating the damage or discoloration of the sample, the original sample should be retained in advance, and the comparison